EHC

Heating Cables

• An economic method of heating a room and providing a luxurious warm floor
• Manufactured to highest quality for complete peace of mind and backed by a 10 year warranty
• Ideally suited to small and irregularly shaped rooms

Application

• Suitable for any room including conservatories, bathrooms and wet rooms
• Ideal for use with wide variety of floor surfaces including ceramic tiles, porcelain tiles, marble, slate, stone, carpet, vinyl,  engineered wood and laminate flooring.

Features

• Twin core heating cable supplied with high adhesion tape
• Pre-wired 3m power lead
• Continuous earth braid
• Cable Specification
• Approved to EN60335-2-96 as required by the 17th Edition Wiring Regulations (BS7671.2008)
• EMC compliant
• 230V supply
• Twin core cable diameter 3mm to 4mm
• Earth screen protection by means of AL/PET Foil

Installation

Tiled Floor

The EHC heating cable should be installed in a flexible self-leveling compound or directly into the tile adhesive. It is important that the heating cable is completely covered.

Other Floor Surfaces (carpet, vinyl, engineered wood and laminate floor)

The EHC heating cable should be completely covered in a flexible self-leveling compound with the required floor surface applied once the compound is completely dry. Great care must be taken to ensure that fixing devices are not driven through the heating cable.
Where underlay is required, the lowest tog option is recommended. If there is any doubt about the suitability of any given floor surface for use withunderfloor heating, confirmation should be sought from the flooring supplier.

Selection

The objective is generally to cover as high a percentage of the free floor area as possible. The free floor area is defined as the floor area not occupied by permanent fixtures such as kitchen cabinets and shower trays. Use the table provided to select the correct cable.

Large Rooms

For large rooms it is common practice to use more than one heating cable. In these circumstances there is a choice of subdividing the room into separate zones each controlled by its own thermostat or connecting the heating cables together electrically in parallel and using a single thermostat. When controlling more than one heating cable from a single thermostat it may be necessary to incorporate a contactor into the control circuit.

EHC Heating Cables - Specifications

Model	Volts	kW	Heated Area (m²)	Cable Length (m)	Weight (kg)
EHC-012	230	0.12	0.7 - 1.0	11	1.1
EHC-020	230	0.20	1.1 - 1.5	19	1.2
EHC-025	230	0.25	1.6 - 2.0	24	1.4
EHC-032	230	0.32	2.1 - 2.5	32	1.6
EHC-040	230	0.40	2.6 - 2.9	37	1.7
EHC-045	230	0.45	3.0 - 3.3	46	2.0
EHC-052	230	0.52	3.4 - 3.8	50	2.4
EHC-060	230	0.60	3.9 - 4.5	64	2.7
EHC-075	230	0.75	4.6 - 6.0	76	2.9
EHC-095	230	0.95	6.1 - 7.5	87	3.2
EHC-110	230	1.1	7.6 - 8.5	115	4.0
EHC-130	230	1.3	8.6 - 10.0	131	4.8
EHC-170	230	1.7	10.1 - 13.0	159	6.3
EHC-200	230	2.0	13.1 - 15.5	Specifications Product Code EHC-075 Customer reviews No reviews left yet Write a review Most RecentTop Rated Quantity Discount / Project Pricing We aim to beat any like for like quote, if you have any quantity requirement or require project pricing please get in touch with us - call or email. We endeavour to get competitive quotes back to you within a few hours.  Email - sales@mhelec.co.uk Phone - 01928 591888 Customer Reviews BN Thermic EHC-075 Heating Cable 4.6-6m² 0.75kW Product Code: EHC-075 RRP: £152.00 £103.17 £123.81 (inc. VAT) Login to add this product to your wishlist. © MH Electrical Distributors Ltd VAT Number: 534945523 Registered company: 2548777