800 Series

High Level Wall or Overdoor Fan Assisted Heaters

• Providing warm inviting commercial premises
• Smart modern appearance
• First class whole life value from a product built to the highest possible standard and designed to give many years of trouble free service
• Low running costs by selecting from a range of control options

Typical Applications

• Overdoor heating in shops and cafes
• Space heating in a wide variety commercial premises

Features Common to all Models

• Dual function bracket for vertical discharge (overdoor) or angled discharge (general space heating)
• Attractive white (RAL9010) finish
• Auto-reset over-temperature protection
• Panel front on/off switch
• Pre-wired to rear mounted terminal enclosures
• Simple reduction in output by removal of link in rear mounted enclosure (3kW heater reduced to 2kW and 6kW heater reduced to 4kW)
• Suitable for use with CS-1 remote mounted controller providing on/off/high heat/low heat/fan only settings

Controlling the 800 Series

830 3kW and 860 6kW

Control mode 1 – Simple on/off control

Simple control using panel front on/off switch

Control mode 2 – Remote Thermostat

Thermostatic control using an RST-TP remote mounted tamperproof thermostat, connected into the rear mounted terminal enclosure. The RST-TP’stamperproof design prevents casual adjustment of temperature setting.

Control mode 3 – Remote controller

Control is provided by means of a remote mounted CS-1 control box which is connected into the rear mounted terminal enclosure.  The CS-1 controller provides on/off/high heat/low heat/fan only settings.

Control mode 4 – Combination of Remote Thermostat and Remote Controller

Both remote mounted RST-TP tamperproof thermostat and remote mounted CS-1 controller are connected into the rear mounted terminal enclosure. TheRST-TP’s tamperproof design prevents casual adjustment of temperature setting. The CS-1 controller provides on/off/high heat/low heat/fan only settings.

830T 3kW with built-in thermostat and 860T 6kW with built-in thermostat

Control mode 1 – Built-in thermostatic control

On/off control is provided by a panel front switch with thermostatic control provided by the built-in electronic thermostat.  Thermostat set-point adjustment is by means of a panel front knob.  Once the temperature set-point is reached, the thermostat will switch off both the heating element and the fan.

Control mode 2 – Combination of built-in thermostatic control and remote controller

Thermostatic control is provided by the built-in electronic thermostat.  Thermostat set-point adjustment is by means of a panel front knob.  Once the temperature set-point is reached, the thermostat will switch off both the heating element and the fan. A remote mounted CS-1 controller is connected into the rear mounted terminal enclosure.  The CS-1 controller provides on/off/high heat/low heat/fan only settings.